You switch on the kettle, the lights go out, and you are left feeling your way to the cupboard under the stairs. If your fuse box keeps tripping, it is annoying, but it is also the system doing its job. A trip switch cuts the power when it detects something wrong. The question is what, and a few safe checks usually point you in the right direction.
What the trip switches actually do
Most modern homes have a consumer unit, still often called the fuse box, with two types of switch.
Circuit breakers (MCBs) protect each circuit, such as the lights, the sockets or the cooker. They trip when a circuit draws more current than it should, from an overload or a short circuit.
RCDs are the larger switches that protect a group of circuits. They trip when electricity leaks to earth, which can happen with a faulty appliance, damp or damaged wiring. They are there to stop electric shocks.
Which switch has tripped tells you a lot about why the fuse box keeps tripping.
Why a fuse box keeps tripping: the common reasons
A faulty appliance
This is the most common cause. Kettles, toasters, washing machines, dishwashers and immersion heaters are the usual suspects, particularly as they age.
Too much on one circuit
Running a heater, a tumble dryer and a kettle off the same circuit can overload it. This is more common in winter, when portable heaters come out.
Water and damp
Water getting into an outdoor socket, a light fitting under a leaking bathroom, or a damp wall can make an RCD trip. If it happens after heavy rain or a leak, that is a strong clue.
A wiring fault
Damaged cables, a loose connection or a nail through a wire during DIY can all cause trips. So can old wiring that is wearing out.
Safe checks when your trip switch keeps tripping
Before you start, make sure your hands are dry and never remove the cover from the consumer unit.
- Look at which switch is in the off position. Note whether it is an RCD or a single circuit breaker.
- Unplug everything on the affected circuit, or switch appliances off at the wall.
- Reset the switch by pushing it back to on.
- Plug appliances back in one at a time, waiting a moment between each.
- If it trips when a particular appliance goes back in, that appliance is likely the problem. Stop using it.
If the switch trips again with nothing plugged in, or will not reset at all, the fault is in the wiring or a fixed appliance. Leave it off and call an electrician.
When the fuse box keeps tripping at night or randomly
Random trips, especially overnight, often point to an appliance that switches itself on, such as a fridge, freezer or immersion heater on a timer. A fridge with a worn compressor or a frost-damaged freezer can trip an RCD hours after you last touched anything. Test those first.
Signs it is more than a nuisance
Call a qualified electrician straight away if you notice any of these:
- a burning smell, scorch marks or buzzing from sockets or the consumer unit
- sockets or switches that feel warm
- lights that flicker across several rooms
- trips that start after water has leaked near electrics
- an old fuse box with rewireable fuses and no RCD protection
Older consumer units without RCDs give much less protection, and upgrading one is a common recommendation after an electrical safety inspection.
A note for landlords
Landlords must keep the electrical installation safe and have it inspected regularly. A tenant reporting that the fuse box keeps tripping should be treated as a repair to look at promptly, not something to live with.
Getting it sorted
If the fault is not a simple appliance, it needs a qualified electrician in London to test the circuits and find it. CityPrime’s electrical services cover fault finding, consumer unit upgrades and safety inspections across London. If you have lost power completely or there are signs of burning, the emergency call-out team can help.
Trip switch questions
Why does my fuse box keep tripping?
Usually because of a faulty appliance, an overloaded circuit, water getting into electrics or a wiring fault. Unplug everything on the affected circuit, reset the switch and plug items back in one by one to find the cause.
Why does my RCD keep tripping?
An RCD trips when electricity leaks to earth. The usual causes are a faulty appliance, damp or water in a fitting, or damaged wiring. If it trips with nothing plugged in, call an electrician.
Is it dangerous if my trip switch keeps tripping?
The switch is protecting you, but repeated trips mean something is wrong. If there is a burning smell, scorch marks or warm sockets, stop using the circuit and call an electrician straight away.
Why does my electricity trip at night?
Often because of an appliance that switches on by itself, such as a fridge, freezer or immersion heater on a timer. Test those first.
Should I replace an old fuse box?
If it has rewireable fuses or no RCD protection, an upgrade is usually recommended. A qualified electrician can inspect it and advise.
