Tomorrow, 1 October, the energy price cap goes up again. For a typical household it rises 4% to £1,723 a year, with gas up 8%. Before you turn the thermostat up to compensate, it’s worth finding out how much heat is simply leaking out. In a lot of London homes, especially older terraces and conversions with sash windows, draught proofing is the cheapest way to keep more of the warmth you pay for. Most of it is a weekend job. However, some of it needs a carpenter.
Here’s where the draughts usually come from, how to fix each one, and what it’s worth.
Is draught proofing worth it?
Yes, and it’s one of the few energy upgrades that pays back quickly. The Energy Saving Trust says professional draught proofing of windows and doors can save around £55 a year in Great Britain. A chimney draught excluder could save another £45 a year. At the new price cap, every bit of heat you keep counts.
Those figures don’t capture everything, though. A room without draughts feels warmer at the same temperature, so you’re less likely to turn the heating up. It’s also quieter, which matters on a busy London street. And for landlords, draught proofing helps towards the EPC C rating that all private rented homes will need by 1 October 2030.
How to find where the cold gets in
Pick a cold, windy day. Then go round the house with the heating on and check:
- around window frames and where sashes meet
- around external doors, especially the bottom and the letterbox
- gaps in floorboards and between the floor and skirting boards
- unused fireplaces and chimneys
- loft hatches
- pipe holes through outside walls, under sinks and behind the boiler
- old extractor fan and cooker hood vents
In most cases, the back of your hand is a good detector. Alternatively, hold a lit incense stick or a strip of tissue near the gap and watch it move.
Draught proofing windows
First, windows are usually the biggest source of draughts in older London homes.
Casement windows (the kind that open on hinges) can take self-adhesive foam or rubber strips around the frame. Buy the right thickness: too thin and it won’t seal, too thick and the window won’t close. Also, replace old strips that have gone flat or brittle.
Sash windows are harder. They need to slide, so foam strips don’t work well. Proper sash draught proofing uses brush strips set into the frame, and it often means taking the sashes out, easing them and refitting. For that reason, it’s a job for a carpenter. Done well, it stops the rattling as well as the draughts and keeps the original windows, which matters in conservation areas.
Gaps between the frame and the wall should be filled with a flexible sealant, not rigid filler, as the frame moves slightly with the seasons.
Draught proofing doors
Next, an external door can let in a surprising amount of cold air.
- fit a brush or rubber draught excluder to the bottom of the door
- add foam or rubber strip around the frame
- fit a letterbox brush or flap
- use a keyhole cover
If the door doesn’t close properly because it’s dropped on its hinges or the frame has moved, no amount of strip will fix it. The door needs adjusting or planing first. Our carpentry and joinery team fixes door and window frames, and it’s usually a quick job.
Internal doors also matter. Similarly, keeping the doors to cold rooms closed and adding a simple draught excluder stops warm air moving where you don’t need it.

Floors, skirting boards and fireplaces
Floorboards. Victorian and Edwardian houses often have suspended timber floors with gaps between the boards. Cold air comes straight up from the void underneath. You can fill the gaps with flexible filler or thin timber strips, or fit a new floor with an underlay. If you’re thinking about new floors anyway, our flooring installation team can include insulation and draught proofing in the job.
Skirting boards. Then run a bead of clear or paintable sealant along the gap between the skirting and the floor.
Chimneys. In fact, an unused open fireplace is like leaving a window open, and with the energy price cap up again, that gets expensive. A chimney balloon or a removable draught excluder blocks the draught. Take it out before lighting a fire, and never block a chimney completely, as it still needs a little ventilation to stay dry.
Loft hatches. Finally, fit foam strip around the edge and insulation on top of the hatch.
Don’t block the ventilation you need
Draught proofing is about stopping uncontrolled gaps, not sealing the house completely. After all, some ventilation is essential, especially in London flats where condensation and mould are common in winter. Don’t block:
- trickle vents at the top of windows
- air bricks on outside walls
- extractor fans in kitchens and bathrooms
- vents needed by gas appliances such as boilers and gas fires
If a room already has condensation or mould, fix the ventilation first. Our guide to autumn home repairs covers damp patches and what causes them.
DIY or professional draught proofing?
In general, most draught proofing on casement windows, doors, letterboxes and skirting boards is simple DIY with products from any hardware shop. A professional makes sense for:
- sash windows
- doors and windows that don’t close properly
- gaps in floorboards across a whole floor
- rotten frames that need repairing first
- landlords with several properties to do before winter
Our handyman service is a good fit for a list of small draught proofing jobs in one visit, before the energy price cap rise hits your winter bills. For bigger work, like replacing rotten frames or refitting sashes, our carpenters can quote after a quick look. Landlords can also read our guide to landlord repair obligations.
Draught proofing questions
How much can draught proofing save?
The Energy Saving Trust estimates around £55 a year for professional draught proofing of windows and doors in Great Britain, and around £45 a year for a chimney draught excluder. Savings grow as the energy price cap rises.
Can you draught proof sash windows?
Yes, you can draught proof sash windows. The best method uses brush strips fitted into the frame so the sashes still slide. It usually means removing and refitting the sashes, so it’s a job for a carpenter.
Does draught proofing cause condensation?
Not as long as you keep the ventilation you need. Leave trickle vents, air bricks and extractor fans clear, and only seal the gaps that let cold air in.
Is draught proofing a landlord’s responsibility?
Keeping windows and doors in good repair is a landlord’s job. Draught proofing also helps towards the EPC C rating private rented homes will need by 1 October 2030.
What is the cheapest way to keep a room warmer?
Self-adhesive foam strip on doors and casement windows, a brush strip under external doors, a letterbox cover and a chimney draught excluder. Together they cost very little and fix the worst gaps.
Want the draughts sorted before winter sets in? Book a visit, call 020 3855 2692, or send us your list.
